Features
- Front Panel
- 2 x Input gain control
- 2 x Low/high frequency selector
- 2 x Low output gain control
- 2 x High output gain control
- 2 x Phase inversion switch
- 2 x 40Hz low cut switch
- Rear Panel
- 2 x Balanced XLR input connectors
- 4 x Balanced XLR output connectors
- Two-way stereo or three-way mono crossover via switch
- Switch to select normal or summed low frequency output
- Switch to select between 1x or 10x frequency
Specifications
Input | |
Connectors: | XLR |
Type: | Electronically balanced/unbalanced, RF filtered |
Impedance: | Balanced>50KΩ,unbalanced>25KΩ |
Max input level: | +22dBu typical, balanced or unbalanced |
CMRR: | >40dB, typically >55dB at 1KHz |
Output | |
Connectors: | XLR |
Type: | Electronically balanced/unbalanced, RF filtered |
Impedance: | Balanced 200Ω, unbalanced 30Ω |
Max input level: | >+20dBu balanced/unbalanced into 600 Ohm or greater |
Performance | |
Bandwidth: | 20Hz to 20KHz, +0/-0.5dB |
Frequency response: | <3hz to="">90KHz, ±3dB |
Signal-to-noise: | Ref: +4dBu, 22KHz measurement bandwidth |
Dynamic range: | >106dB, unweighted, any output |
THD+noise: | <0.004% at +4 dBu, 1KHz <0.04% at +20 dBu, 1KHz |
Interchannel crosstalk: | <-80dB, 20Hz to 20KHz |
Crossover Frequencies | |
Stereo mode | |
low/high: | 45 to 960Hz or 450Hz to 9.6KHz(x10 setting) |
Mono mode | |
Low/mid: | 45 to 960Hz or 450Hz to 9.6KHz(x10 setting) |
Mid/high: | 45 to 960Hz or 450Hz to 9.6KHz(x10 setting) |
Filter type: | Linkwitz-Riley, 24dB/octave, |
Power Supply | |
Power consumption: | 220V ±10%/50Hz |
Mains connection: | 15WATT IEC 320 receptacle |
Physical | |
Dimensions: | 483x175x45mm |
Weight: | 1.7kg |
Shipping weight: | 2.5kg |
C223+ Application
C223+ Installation
C223+ Parts
C223+ Cases
C223+ Collocation
Videos
Downloads
Filename | Version | Language | Size | Updated |
β3 C223+ Datasheet | 1.0 | 200KB | 2024-11-21 20:19:12 | |
β3_C223_Electronic_Periphery_English_Manual | 1 | 140.54KB | 2018-07-12 02:25:39 |