C223+
2-WAY, 3-WAY CROSSOVERS
The C223+ is a 1U Stereo two-way/mono three-way active crossover.
  • Front Panel
    2 x Input gain control
    2 x Low/high frequency selector
    2 x Low output gain control
    2 x High output gain control
    2 x Phase inversion switch
    2 x 40Hz low cut switch
  • Rear Panel
    2 x Balanced XLR input connectors
    4 x Balanced XLR output connectors
  • Two-way stereo or three-way mono crossover via switch
  • Switch to select normal or summed low frequency output
  • Switch to select between 1x or 10x frequency
Input

Connectors:
XLR
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced>50KΩ,unbalanced>25KΩ
Max input level:
+22dBu typical, balanced or unbalanced
CMRR:
>40dB, typically >55dB at 1KHz


Output

Connectors:
XLR
Type:
unbalance≤50Ω,balance≤100Ω
Impedance:
Balanced 200Ω, unbalanced 30Ω
Max input level:
>+20dBu balanced/unbalanced into 600 Ohm or greater


Performance

Bandwidth:
20Hz to 20KHz, +0/-0.5dB
Frequency response:
<3hz to=>90KHz, +0/-3dB
Signal-to-noise: Ref: +4dBu, 22KHz measurement bandwidth
Dynamic range: >106dB, unweighted, any output
THD+noise:
<0.004% at +4 dBu, 1KHz
<0.04% at +20 dBu, 1KHz
Interchannel crosstalk:
<-80dB, 20Hz to 20KHz


Crossover Frequencies

Stereo mode

low/high:
45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
Mono mode

Low/mid:
45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
Mid/high:
45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
Filter type:
Linkwitz-Riley, 24dB/octave,


Power Supply

Power consumption:
220V ±10%/50Hz
Mains connection:
15WATT IEC 320 receptacle


Physical

Dimensions:
483x175x45mm
Weight:
1.7kg
Shipping weight:
2.5kg
Related Products
Case